Pure-Spa Hot Tub Filter - CLOUD
Replaces PWW50P3, WY45, FC-0359, 6CH-940, SC714, 60401, SS01
The Pure-Spa Cloud Hot Tub Filter is a customer favourite for its reliability, performance, and ease of maintenance. Crafted with precision and made from high-density micro-filtration fabric, this filter is engineered to trap even the smallest impurities, ensuring crystal-clear water in your spa or hot tub. With its 50 square feet of filtration area, it boasts high dirt-holding capacity, maintaining water cleanliness with less frequent changes.
Key Features:
- Enhanced Filtration Fabric: High-density material captures fine particles, ensuring a pristine spa experience.
- Extensive Filtration Area: Covers 50 sq ft, maximising efficiency and providing long-lasting performance.
- Optimal Flow Design: Promotes superior water flow and exceptional filtration for a more enjoyable soak.
- Anti-Bacterial End Cap: Protects against bacterial growth and resists chemical exposure for durability.
This versatile filter is designed to replace models such as PWW50P3, WY45, 6CH-940, DL714, SC714, 60401, and SS01. It fits a wide range of Superior Spas models, including Trident, Kenya, Infinity, Palermo, Palermo2, and Aqua1.
Pair this filter with the Pure-Spa Cloud+ for an automatic cleaning tablet dispensing system to make maintenance even easier!
| Pleatco Ref | PWW50P3 |
| Filbur Ref | FC-0359 |
| Unicel Ref | 6CH-940 |
| Darlly Ref | SC714, 60401 |
| Other Ref | 817-0050, 03FIL1400, 25252, 378902, PWW50 |
| Filter Diameter (Range) | 150-159 mm |
| Filter Diameter | 150 mm |
| Filter Length | 200 mm |
| Filter Top | Handle |
| Filter Bottom | Male Thread - SAE Course |
| Thread Type | 1.5" SAE |
| Thread OD | 46 mm |
| Filtration Area | 50 sq.ft |
Dimensions:
- Length: 200mm
- Diameter: 150mm
- Bottom Opening: 38mm
- Thread Type: SAE Male Coarse Thread
Compatible Models:
Replaces PWW50P3, 6CH-940, WY45, DL714, SC714, SS01, 60401Superior Spas Compatibility:
Trident, Kenya, Infinity, Palermo, Palermo2, Aqua1
Cleaning Tips:
- For best results, rotate between two filters: one in use and the other soaking in a cleaning solution for 2448 hours to fully remove residues.
- Allow filters to dry completely before reinstallation, as this improves their performance and longevity.
Fitment Tips:
- Filters that differ slightly in height or diameter (within 510mm) may still fit your hot tub. However, compatibility depends on:
- Top Design: Closed tops cannot be replaced with open-top cartridges.
- Bottom Thread: Must match your original filter.
- Square Footage: Should be within 1015% of your current filter to avoid restricting water flow or overworking your pump.
Using a significantly mismatched filter may lead to inefficiency or potential damage to your hot tub's pump system. If in doubt, consult the specifications or contact our team for advice.
